2 SATA ports (1 internal SATA and 1 external eSATA), 4 USB 2.0 ports and 1 IDE port
Allows you to connect both a SATA
drive, an eSATA drive, multiple USB devices and 2 IDE hard drives or CD-ROM,
DVD burner in the same
system
SATA and eSATA ports provide
data transfer rates of up to 150
Mbytes/sec, IDE offers data transfer rates of up to 133 Mbytes/sec and USB 2.0 up to 480 Mbits/sec
Need an upgrade but don’t have a lot of room to spare? This
SATA, eSATA, USB 2.0 and IDE Combo PCI card gives you an amazing number of
connection options while using only one PCI slot. Adding this many ports would normally take two or three PCI slots, but with this card you get
an internal SATA port, an external eSATA port, four external USB 2.0 ports, and
an IDE drive connection, all on the same card!
Perfect for any system where space is tight but high performance is still needed, this combination card puts
the popular interfaces right at your fingertips.
VIA VT6421A SATA chipset & VIA VT6214L USB 2.0 chipset
Supports 32-bit PCI Bus Mastering Mode at 33mhz
Compliant with PCI specification version 2.2
Plug and play is fully supported on SATA and USB interfaces
What's In the box:
eSATA, SATA, IDE and USB 2.0 Combo PCI card
Driver CD
User manual
eSATA, SATA, IDE, USB 2.0 PCI Card Specifications
SATA:
1 internal SATA port
1 external eSATA port
Data Transfer Rate: Up to 150 Mbytes/sec
Standards: SATA 1.0 standard
Supports software RAID 0, RAID 1 and JBOD
IDE:
1 internal IDC 40 connector
Data Transfer Rate: Up to 133 MBytes/sec
Supports Mode 6 Ultra DMA transfers
Supports 48-bit LBA for hard drives over 137GB
Compliant with ATA/ATAPI-6 specification
Supports two IDE drives
USB 2.0:
4 external USB 2.0 ports
Data Transfer Rate:
USB 2.0: Up to 480 Mbits/sec
USB 1.1: Up to 12 Mbits/sec
Standards:
USB 2.0, OHCI USB Rev 1.0a
EHCI USB Rev 0.95
System Requirements
Pentium II 400 MHz or faster desktop computer with available PCI slot
Windows 98SE, ME, 2000, Sever 2003, XP, XP 64-bit, Vista
