Serial ATA II PCI-X RAID Controller - 2 External and 2 Internal SATA Ports

IN STOCK

Don't Forget
External Shielded eSATA Cables and
Internal Serial ATA Cables
Team Up this Host Controller with:
Seagate Serial ATA II Hard Drives
Western Digital Serial ATA II Hard Drives
Hitachi Serial ATA II Hard Drives

You get two external eSATA and two internal Serial ATA ports for your high performance Serial ATA hard drives. Whether you need Striping (RAID 0), Mirroring (RAID 1), or RAID 1+0), this card has you covered.  Also functions as non-RAID controller for up to 4 individual drives!   

• Silicon Image SiI 3124 chipset supports up to 4 Serial ATA drives 
• Two external eSATA and two internal Serial ATA ports
• Compliant with Serial ATA II specification (the extension of SATA 1.0a Revision 1.1)
• Compliant with Gen2i, Gen2m SATA II Electrical specification Revision 1.0 
• Backward compatible with SATA 1.0
• PCI-X 64-bit, 133 MHz host interface
• Integrated PCI DMA engines 
• Metal shielded Serial ATA connectors for extra durability 
• Supports Serial ATA data rates up to 3Gb/sec (300 MB/s)
• Supports Native Command Queue (NCQ), Port Multiplier, First Party DMA 
• Supports RAID 0 (striping), RAID 1(mirroring) and RAID 0+1 (striping & mirroring) for performance and reliability 
• Use as non-RAID controller for up to 4 individual drives
• Supports SATA I and SATA II hard drives of any capacity

• Serial ATA PCI-X RAID Card
• CD with drivers and RAID Software
• Quick Installation Guide

• 2 eSATA and 2 internal Serial ATA ports
• PCI-X Bus: 64-bit, 133 MHz
• Supports Serial ATA data rates up to 3Gb/sec (300 MB/s)
• FIFO: 256 Bytes per channel 
• Supports first-party DMA commands for Native Command Queuing 
• Supports SATA Port Multipliers
• Supports SATA I and SATA II hard drives of any capacity
• Integrated PCI DMA engines 
• Supports Spread Spectrum Receiver 
• Supports RAID 0, RAID 1, RAID 1+0, RAID 5
• Works as a non-RAID controller to add up to 4 individual drives
• Supports Hot Swapping of drives

• Windows PCs:
  • Pentium III 700Mhz or faster desktop computer
  • 128 MB RAM or more
  • Available PCI-X slot or 32/64 bit PCI slot (PCI-X slot required for maximum performance)
  • Operating Systems:
    • Windows 2000
    • Windows XP
    • Windows Server 2003
    • Vista
• Macs:
  • Provides SATA port multiplier compatibility on all four ports with an Apple PowerMac G4 or G5 running Mac OS X 10.3.x or 10.4.x. Not intended for use with individual SATA hard drives in a direct connect configuration.
  • Mac OS X Version 10.3.x or later
  • Available PCI-X slot or 32/64 bit PCI slot (PCI-X slot required for maximum performance)
  • Power Mac G4* 
  • Power Mac G5 with PCI-X slots (not compatible with G5 Dual or Quad, see Hi Performance x8 PCI-e eSATA card)

  * All models except Cube.