- Adds two high-speed eSATA ports to Windows ExpressCard/34 or ExpressCard/54 equipped
notebooks
- Supports RAID 0, 1,5 and 10 with data transfer rates up to
3.0Gb/s (300MB/s)
- Supports two individual eSATA drives
- Supports up to 10 external drives*
Use this card to connect two external eSATA hard drives to your
ExpressCard 34 or ExpressCard 54 equipped laptop computer. Or through its support of
SATA Port Multipliers, the two ports can handle up to ten hard drives*!
Used with high-performance drive enclosures like
this 5-Bay
SATA Port Multiplier Enclosure, this card can manage the data flow of up to five drives in one enclosure through a single
cable! With the above enclosure using 5 SATA hard drives in a RAID 0
array, the card can typically achieve sustained disk writes of 130 MB/sec and
reads of 140 MB/sec!
Supports Serial ATA II Port Multiplier 1.0 Specifications revision 1.1 and
used with SATA Port Multiplier Enclosures containing multiple SATA hard drives,
supports RAID levels 0, 1, 5, and 10!
*Support for 10 drives requires the use of drive
enclosures employing port multipliers (like Sonnet's
Fusion 500P Port Multiplier Enclosure or this SATA Port Multiplier
Enclosure, 5-Bay with LCDs). When using an enclosure without a port multiplier (such as
this 2 Bay External SATA II RAID
Enclosure), the card will support up to 2 drives.
SATA ExpressCard 34 Specifications
- Compliant with Serial ATA 1.0a specification with support for complement of SATA II optional features
- Compliant with eSATA (external SATA) connector specifications and supports SATA hard disk hot-plugging
- Supports data transfer rate up to 3.0Gb/s (300MB/s)
- Supports Native Command Queuing (NCQ) and SATA TCQ commands
- Breaks the 137GB barrier! Works with SATA hard disks of any capacity.
- One-year Manufacturers Warranty
What's In the box:
- eSATA II ExpressCard 34 RAID Card
- Driver software CD
- User’s guide
SATA ExpressCard 34 System Requirements
|
